Difference between elbow and elbow in manufacturing process

The essential difference between elbow and elbow is mainly the difference between "head" and "pipe". In addition, there are also great differences in the manufacturing process.

Elbow is a kind of connecting pipe fittings commonly used in plumbing installation. It is used to connect the bend of the pipeline and change the direction of the pipeline. It is used to connect two pipes with the same or different nominal diameters to make the pipes turn at 90 °, 45 °, 180 ° and various degrees.

The following is a brief introduction to the differences between elbow and elbow in manufacturing process:

1. The elbow is shorter than the elbow. R = 1 to 2 times is the elbow, and the larger is the elbow.

2. The cold bend can be bent with a ready-made straight pipe bender, and there is no need for secondary anti-corrosion after one-time completion. However, the elbow shall be customized by the manufacturer, and anti-corrosion measures shall be taken. The ordering period is long.

3. The price of the elbow is higher than that of the elbow, but the cost performance is much higher than that of the elbow. The elbow without anti-corrosion treatment is easy to be damaged, but because of its low price, it is often used in some projects with low requirements. Therefore, due to the different performance and price of elbows and elbows, attention must be paid to the selection.